Product Name:KT-202
This is automatic oca film machine.We need to connect the air compressor to work .The Pressure Regulator back of machine is for control down suction plate,when adjust Pressure Regulator to big,the down side suction plate will be strong,up suction plate suction will be weak,inusually,we just adjust it to half,then lock it.
Product Details
Product Norm
Aftermarket Service
Operating steps:
1.First use the tape to seal the up and down side suction plate.
2.Put the glass on down suction plate edge position,Let Machine roller can cover the edge of glass,then use pen make a mark,for next operation can find the same place.
3.Under the glass cover place,use Sharp stuff make one hole between two holes.
4.OCA must alignment the wheel,Roller must be pressed onto the edges of OCA,The cover place of up plate by OCA,use the sharp stuff make holes completely.
5.Plug the power line,air compressor connection tube,turn on the Power switch.
6.Put the glass to the same place as marked,turn on the vacuum switch,clean the glass.
7.Tear off the protect film of oca,turn off the vacuum switch.
8.Press the up suction plate on down suction plate,Turn on the vacuum switch.
9.When OCA be suction,Lift the up suction plate,Then tear off another protect film of OCA.
10.Press the up suction plate to under suction plate again,turn on the start button,after that turn off start button,whole process finished.
1.First use the tape to seal the up and down side suction plate.
2.Put the glass on down suction plate edge position,Let Machine roller can cover the edge of glass,then use pen make a mark,for next operation can find the same place.
3.Under the glass cover place,use Sharp stuff make one hole between two holes.
4.OCA must alignment the wheel,Roller must be pressed onto the edges of OCA,The cover place of up plate by OCA,use the sharp stuff make holes completely.
5.Plug the power line,air compressor connection tube,turn on the Power switch.
6.Put the glass to the same place as marked,turn on the vacuum switch,clean the glass.
7.Tear off the protect film of oca,turn off the vacuum switch.
8.Press the up suction plate on down suction plate,Turn on the vacuum switch.
9.When OCA be suction,Lift the up suction plate,Then tear off another protect film of OCA.
10.Press the up suction plate to under suction plate again,turn on the start button,after that turn off start button,whole process finished.
SUPPLY： AC100-240V
POWER： 100W
SIZE： 440*230*200MM
WEIGHT： 9.8KG
POWER： 100W
SIZE： 440*230*200MM
WEIGHT： 9.8KG
Official Service