Product Name:KT-103
This is a newest upgrade 15 inch laminating debubbler in one machine.Built-in air compressor and vacuum pump.
Laminating and bubble remove only one step,100% no bubbles.
Laminating and bubble remove only one step,100% no bubbles.
Product Details
Product Norm
Aftermarket Service
Operating steps:
1.Plug in power line,turn on the power switch.
2.Adjust laminating pressure to 0.5Mpa.
3.Touch system start,click"setting".
4.Set the "vacuum time" to 15S,"laminating time" 25S，"Debubble time" 5-10M,"Laminating debubble temp"40 degree,Click"comfirm",Click"automatic" preheat.
5.Open the machine cover lid,tear off the oca protect film.
6.Put the glass on lcd,then use one finger click the middle screen softly.
7.Put it to laminating area in order,close the cover lid,Tighten the screws.
8.Click “ start ”,vacuum air-removed start,Tighten the scews again .
9.It will turn to bubble remove mode after 25 seconds automaticly,it will automatic exhaust after debubble.
10.Loosen the screws,Take out the screen.
1.Plug in power line,turn on the power switch.
2.Adjust laminating pressure to 0.5Mpa.
3.Touch system start,click"setting".
4.Set the "vacuum time" to 15S,"laminating time" 25S，"Debubble time" 5-10M,"Laminating debubble temp"40 degree,Click"comfirm",Click"automatic" preheat.
5.Open the machine cover lid,tear off the oca protect film.
6.Put the glass on lcd,then use one finger click the middle screen softly.
7.Put it to laminating area in order,close the cover lid,Tighten the screws.
8.Click “ start ”,vacuum air-removed start,Tighten the scews again .
9.It will turn to bubble remove mode after 25 seconds automaticly,it will automatic exhaust after debubble.
10.Loosen the screws,Take out the screen.
SUPPLY： AC220V/AC110V
POWER： 800W
SIZE： 420*350*330MM
WEIGHT： 32.2KG
POWER： 800W
SIZE： 420*350*330MM
WEIGHT： 32.2KG
Official Service