Product Name:KT-102
This is new upgrade KT-102 5 in 1 smart Touch panel lamintaing machine.
Product Details
Product Norm
Aftermarket Service
Laminating without bubble operation step:
1.Plug in the power,turn on the switch of machine.
2.Clockwise rotation the emergency stop button softly until the button bounce.
3.Touch panel system start,click "setting"-click "laminating setting "Set laminating time 180s,Set vacuum time to 15s,set laminating temperature 40℃.
4.Click" comfirm" key,then click "return ",Click laminating after return the first page.
5.Adjust the laminating pressure to 0.35MPa.
6.Clean the lcd ,tear off oca protective film fast with by sticker,then put it on lcd gently,then use first finger click the middle screen.
7.put it on tray in order,then put the tray in laminating tank,close the door.
8.Chlick ‘Start ’ button,Use one hand press the door until it be sucking.
9.when Vacuum Gauge arrive Default Values,the laminating plate will press down.
10.Once the set time is reached,vacuum door will open automatically,take out screen.
Fast laminating operation steps:
1.Laminating time set to 20S,laminating pressure to 0.4MPa.
2.Other setting same like First operation way ( laminating without bubble operation steps).
Bubble remove operation step:
1.Click exhaust button，open the bubble removor tank door after exhaust finished.
2.Put the screen into bubble removor tank.
3.Click "return "button，chlik "setting" -"buble remove setting".set the buble remove time 10-20M，bubble remove temp 40℃.
4.click "confirm" -"return ",start remove bubble after returned first page.
5.After reached the set time,bubble machine auto exhaust，open the bubble removor tank door after exhaust finished take out the screen.
1.Plug in the power,turn on the switch of machine.
2.Clockwise rotation the emergency stop button softly until the button bounce.
3.Touch panel system start,click "setting"-click "laminating setting "Set laminating time 180s,Set vacuum time to 15s,set laminating temperature 40℃.
4.Click" comfirm" key,then click "return ",Click laminating after return the first page.
5.Adjust the laminating pressure to 0.35MPa.
6.Clean the lcd ,tear off oca protective film fast with by sticker,then put it on lcd gently,then use first finger click the middle screen.
7.put it on tray in order,then put the tray in laminating tank,close the door.
8.Chlick ‘Start ’ button,Use one hand press the door until it be sucking.
9.when Vacuum Gauge arrive Default Values,the laminating plate will press down.
10.Once the set time is reached,vacuum door will open automatically,take out screen.
Fast laminating operation steps:
1.Laminating time set to 20S,laminating pressure to 0.4MPa.
2.Other setting same like First operation way ( laminating without bubble operation steps).
Bubble remove operation step:
1.Click exhaust button，open the bubble removor tank door after exhaust finished.
2.Put the screen into bubble removor tank.
3.Click "return "button，chlik "setting" -"buble remove setting".set the buble remove time 10-20M，bubble remove temp 40℃.
4.click "confirm" -"return ",start remove bubble after returned first page.
5.After reached the set time,bubble machine auto exhaust，open the bubble removor tank door after exhaust finished take out the screen.
SUPPLY： AC220V/AC110V
POWER： 800W
SIZE： 450*430*300MM
WEIGHT： 48KG
POWER： 800W
SIZE： 450*430*300MM
WEIGHT： 48KG
Official Service